Home Technology Solutions to Fix Canon Printer Error B200

Solutions to Fix Canon Printer Error B200

by The Post Zilla
Canon Printer Error B200

Solutions to Fix Canon Printer Error B200

Printing errors create hindrance and unnecessary interruptions in your everyday work that must be eliminated for getting a smooth printing experience. Canon B200 printer error is among the common issues most users encounter when printing a page. This error happens because of faulty and improper printer heads, problematic cartridges, outdated canon printer drivers, etc.

If the print head isn’t clean or the cartridges are installed within the wrong slots, otherwise you send the commands to your printer using the outdated printer drivers, you’ll see this error on the printer display. This error won’t allow you to complete the printing and delay your work. Hence, you’re required to unravel this error instantly when it’s displayed on your printer screen.

But if you do not have the technical knowledge for resolving this issue, this can be the right guide for you. This blog consists of some of the simplest working troubleshooting methods to resolve this issue within a couple of seconds.

Steps to Resolve Canon Printer B200 Error

If ever you face this error, please don’t instantly junk your printer or replace its possibly faulty components. It’s a costly decision that you should consider as a final resort. After all, there are methods that you can attempt to resolve the difficulty without spending a single dime quickly.

Perform the Power Reset 

The simple and more straightforward method to get eliminate the Canon B200 error is resetting your printer. Once you reset your printer by powering it off a few times, it’ll continue rest mode, and every one of its essential parts will automatically suit its proper position. So, check out the given process and quickly reset your printer. 

  • First. ‘Power off’ your printer. 
  • Now, press the ‘Stop’ button for two seconds. 
  • Now, you’re requested to press the ‘ON’ button while holding the Stop button. 
  • Keep holding the ‘ON’ button, but you have to release the ‘Stop’ button for once. 
  • After that, press the ‘Stop’ button five times while still holding the ‘ON’ button. 
  • Now, release both the buttons and await the printer to shut down. The power light will still blink until the printer is shut down. 
  • Finally, start the printer after a while. The reset process is complete for your printer. Now attempt to print and check whether the B200 error displays or not.

Insert a replacement Cartridge

If your printer shows a B200 error in between the printing, it must be possible that the installed ink cartridges are faulty. In this case, you should replace the old cartridge with a replacement one. For that, check the hardware specifications of your particular printer, then insert a cartridge that most accurately fits your printer. This might resolve the canon printer B200 error.

Uninstall the Outdated Printer software and Reinstall

If you’re trying to forward the print requests to your printer using an outdated printer driver, your printer will surely not respond and should show you a B200 error. Hence uninstall the driver from your specific OS. Select your printer model, then download the newest printer driver. For installation, you have first to link your printer to the pc, acknowledge all the Canon agreements, allow the firewall settings, and eventually tick mark the software checkboxes. This may complete the reinstall process of Canon drivers. 

Remove Old Ink

There could also hardened ink trapped inside the print head. Run it under hot water until the water comes out clean. Dab it dry with a towel, then reinsert the head into the printer.

Using the driver Setup window

First, launch the printer driver setup window and click on on the maintenance tab. Then, select ‘Cleaning’ and also the ‘Print Head Dialog’ box. Pick the category of ink that must cleaned, and click on ‘Execute.’ The cleaning method will begin. Wait till the confirmation message displays. Then click ‘Print Check Pattern’ and see whether the print quality has improved or not. If the B200 error remains occurring, you have to clean the printheads manually.

Clean the Print Head Manually  

First, open the top cover of your printer and remove all the installed cartridges. Now pull up the handle and remove the printhead. The printer heads are very fragile, so you would like to handle them with utmost care. Hold clean cotton and dip it into warm water. Now, clean the additional ink from the print head and let it dry. Once the printer head prepared to insert back to the printer, install it carefully. Place all the ink cartridges, close the printer’s top cover, and check for the B200 error. 

If the Canon Printer Error B200 persists, contact a knowledgeable printer technician to avoid further damage. There may be something seriously wrong with your printer’s interior or one of its parts. Contact customer services to seek out if your warranty still covers your printer problems.

Related Posts

Leave a Comment