Oh No 5GHz Not Working In Tplink Range Extender? Simple Ways To Fix
Table of Contents
In the long-range, the network range is not stable on the wireless networking router then the user’s face is interrupted & buffering network signals. Then users face issues & not seamlessly enjoy online gaming, streaming, & online experience. If you think about increasing the network range of your existing router, you can easily amplify the range of your wireless router. The Tplink range extender is the perfect solution to amplify the network range of your existing device. With the network range of the extender, you can easily increase the range of your existing router. There are internal antennas inside the extender device which actually makes the network signals 3 times faster. Although, the AC technology is also equipped in this device that accurately boosts the wireless network in a quick manner.
The wireless range extender is widely compatible with 802..1a/b/g/n networks. If your router is of any network such as a, b, c, or n then this device will easily increase the network signals. Then, you can easily enhance the network signals with this extender device. If you wish to configure the setting like enable the 5GHz network then you should know the IP address of this device. The default IP address of this device is 192.168.0.254. With this, you can easily enable a 5GHz network.
Why is the 5GHz network not working in the Tplink Range Extender?
The Tp-link WiFi range extender comes along with a dual-band network. In the dual-band network, the 5GHz & 2.4GHz network is equipped. If you really wish to enhance the wireless network then you can enable the 5GHz network and completely enjoy the network signals. But sometimes the issue comes, the 5GHz network is not working then the user faces various issues. There are many causes by which the 5GHz network is not working, which are as follows:
- WiFi network not available
- Not using correct IP address
- Not access login page
- Network password wrong
- Firmware version issue
Simple ways to fix 5GHz Not Working In Tplink Range Extender
If the 5GHz network is not working in the range extender device then you should verify the issue. Because many issues are very common then you can try to fix it manually. In the given below, there are some useful steps to properly resolve the issue.
Verify the Range extender setting
Sometimes the setting of the extender is wrong then the 5GHz network is not working. To manually resolve the issue you should verify the setting in an accurate manner. To verify the extender setting, you can open the browser utility and then input the login default IP address. After inputting the IP address, the login window is displayed. You can log in to the account by input the admin password in their field. After visiting the home page of the extender and selecting the setting option. Under the setting, you can select the wireless setting option. Under this setting, you properly verify the network band, wireless channel, internet connection, & security p[ortocol. If any setting is configured wrong then you quickly modify this setting and then click the save option.
Restart the device
To properly resolve the 5GHz network issue, you can restart the extender device. Before restarting this device, you need to check that you have not made any wired connection with this device. If you have a wired connection then it will have to be disconnected. Then, unplug the extender into the power outage. Now, you can press the power button for a few settings and LEDs status off. That means your device powers off in an accurate manner. After 10-15 minutes, you can plug the device into the power supply and turn ON the device again with the power button.
Eliminate weak WiFi network signals
If the WIFi network signal is not stable then you cannot enable the 5GHz network. To resolve the issue, you need to verify the WIFi network connectivity in your device. If the network signal is actually unstable then you can connect the modem to the range extender. You can easily connect the modem to the range extender through the WPS button. Just press the button and then easily make the connection. If you do not use the WPS button then you can make a wired connection through the Ethernet cable & LAN port. After that, you can easily enable a 5GHz network in the range extender device.
Update the extender device firmware
If the 5GHz network is not working in the tp-link wireless extender device then you should verify the firmware version. Because many times the version of the firmware is outdated then your extender is not working. If the extender device won’t work, your 5GHz network won’t work either. To properly resolve or fix the issue, you can use the IP address of this device. After that, visit the setting of the extender device. In the setting, you can select the firmware upgrade option and upload the firmware file. After that, the firmware easily updates.
Password
Sometimes, if you use an incorrect password then the 5GHz network is not working. Then, you should verify the password. If you use an incorrect password then you can remove this password. After that, you can use the correct password, and then the 5GHz network accurately works.
