If you work in any multinational company, you have to save your files and documents well. So you can use a powerful; storage device. Because the computer & laptop does not have enough space to save the files & documents. If you want to save your files and documents completely, then you can do it well by using a storage device. But the storage device should be such that it is suitable for all computers and storage. Then, the Asustor Network storage device is a completely perfect device for all the devices. Because every device is easily connected with this device and you can share files easily. Inside this device, the dual-core processor is there that accurately amplifies the speed to share the files & documents.
Additionally, the LAN port is built-in in the network-attached storage device on the back panel. If you have a windows 10 device then you can quickly connect this device by using the LAN port. The main & important thing about this device, you can easily & anywhere access the files & documents remotely. But for this, you should know the asustor default password. Without this password, you cannot access the files & documents. This password is most important for the storage device.
The network-attached storage device is fully compatible with windows 10 computers or laptops. If you want to share any files and documents from your computer and laptop, then you can easily do it. But sometimes, the NAS device is not visible in Windows 10 devices. Then, there are many reasons the NAS is not visible on the computer or laptop device. These reasons are as follows:
- NAS is not within Window 10 range
- Cable connection faulty
- LAN port is faulty
- Storage device not connecting to the WiFi network
- Not configure the setting
If the storage device is not visible on your computer or laptop device then you should verify the issue. If you really wish to resolve the issue manually then you can follow some steps. To properly resolve the issue, you can follow some given below steps and accurately resolve the issues.
If the storage device is far away from the computer & laptop then your storage device is not visible on Windows 10 devices. To really resolve the issue, you can place the NAS device near the computer or laptop device. If you place the network-attached storage device too close to the computer & laptop then your device is accurately visible in the windows 10 device. If the computer device is positioned in the drawing-room of your home then you can also place the NAS device in the drawing-room of the home. With this, you will be able to make a connection to the PC and your device will be visible from the top in Windows 10. Thus, it is the most suitable option to manually resolve the issue.
Many times the cable that you are using is bad or useless due to which the storage device is not accessible. So to completely solve the issue you should verify the cable. If the cable is really faulty or is broken in the middle then you will have to unplug this cable. For this, you can take a faulty & damaged cable and then unplug it into the LAN port of the storage device & computer. After that, you can use a working condition network cable and then properly attach it to an available port of your WiFi storage device & computer. You can turn ON the device and verify the connection. Now your device will be visible on Windows 10 devices.
If you wish to resolve the issue in the proper manner then you can restart the device. Before restarting the device, you should verify all the cables, if anyone bothers then it will have to be disconnected. After disconnecting the cable into the network-attached storage device or windows 10 device. Then you can use the power button, this button is located on the bottom panel of the storage device. You can press this button and properly power off the device. After that, you can turn ON the device again and use the NAS & computer.
The setting is the main step to resolve the issue. If you wish to configure the setting then you can asustor login account. Without an IP address or password you cannot log in to the account, then, you can use the default IP address & login default password. After login into the account, you can visit the setting,.in the setting option, you can properly configure all the settings in the proper manner.
If the firmware of the storage device is outdated then it is not visible in windows 10. Then, you should upgrade the firmware to the latest version. In the setting of the network-attached storage device, you can select the firmware upgrade option. After that, by using the latest firmware file you can easily update the firmware in the latest version of the storage device.